Description
Molex MX150L Industrial Sealed Connector System
Overview
The MX150L sealed connector system is designed to meet the need for a rugged, environmentally sealed connector system supporting both low-level signal circuits as well as power circuits. Ideal for harsh environments, marine, off-road, racing and engine compartment applications. Connectors utilize silicone-based seals to protect internal contacts. Easy to mate with latching audible and tactile click lock system. Disconnection is only possible by depressing the protected release tab and pulling the connectors apart. This connector system is available in 2, 4, 6, 8, 10, 12 and 16 circuit configurations. Wired for DC applications only up to 50 volts with standard wall 18AWG, cross linked SXL automotive wire. Insulation has smooth surface finish, resistant to gasoline, oil, grease, coolant, most acids and solvents. Wire is multicolored for easy installation.
Connector Specification:
- Molex MX150L Series
- Seal rating = IP67
- Circuit count = 16
- Color = Black
- Material = SPS Glass-Filled crystalline Polymer
Wire Specifications:
- 18 AWG
- 50 VDC, 125 degrees C
- Stranded, Bare Copper
- SAE Type = SAE-J1128 SXL
- Standard Wall SXL Cross-Link
- Wire Length = 48" both ends
- Free ends are stripped 0.6" with slugs left on to protect wire strands
Contacts:
- Tin plated contacts
- Male contacts in Plug
- Female contacts in Receptacle
Ratings
- 50 VDC, 7 Amp MAX *
- Max Temp 125 Deg C
* Total MAX current will be dependent on the total wire length and gauge of wire used in the entire circuit. As wire length and wire gauge decrease, current capacity will decrease. Total wire length is the distance that the wire will travel from the source to the load (through the connector kit) plus the length of the return lines.
Wire color configuration by connector terminal location: (Same for both connectors)
- Red
- White
- Black
- Blue
- Yellow
- Green
- Brown
- Orange
- Violet
- Light Blue
- Pink
- Tan
- Light Green
- Gray
- White
- Black