HD-05 - TYCO MATE-N-LOK, 18 AWG UL1015

TE Connectivity Universal MATE-N-LOK Series

Overview

Ideal for commercial vehicles, light equipment, sensors, machines, automation and light power applications. This connector system is available in 1, 2, 3, 4, 5, 6, 8, 9, 10, 12 and 15 circuit configurations. Wired with heavy insulated, 18AWG, 600V wire. Both plug and cap have positive locking housings to prevent accidental disengagement when used in panel mounted applications or as free-hanging connectors. They are molded from 6/6 Nylon 94V2. Very robust and proven design. Can be used for either AC or DC applications.  Dual locking tabs must both be depressed to disconnect. Polarized for only one-way fit. 

Connector Specification:

• TE Connectivity (Tyco/AMP) 
• Connector Series = Universal MATE-N-LOK
• Circuit Count = 5
• Color = White/Natural
• Material = Nylon Plastic
• Sealed = No
• Receptacles are panel mountable [Recommended panel thickness: 1/32 – 3/32 ” (0.76 – 2.29                                                              mm)

Wire Specifications:

• 18 AWG
• UL 1015
• 600 VAC, 105 degrees C
• Stranded, Tinned Copper
• PVC, Appliance Wire Material (AWM)
• Wire Length = Available is 6" both end or 48" both ends
• Free ends are stripped 0.6" with slugs left on 

Contacts:

• Tin plated contacts 
• Male contacts in Plug
• Female contacts in Receptacle

Ratings

• 600VAC 10.5 Amp MAX *
• -65 to 255 Deg F

* Total MAX current will be dependent on the total wire length and gauge of wire used in the entire circuit. As wire length and wire gauge decrease, current capacity will decrease.  Total wire length is the distance that the wire will travel from the source to the load (through the connector kit) plus the length of the return lines.  

Wire color configuration by pin number location: (Same for both connector ends)

1. Red
2. White
3. Black
4. Blue
5. Yellow